Solenoids

We offer fuel off solenoid at a cost effective price. These solenoid come with built in timers. They will pull the fuel injection pump lever when the positive supply to the signal terminal is disconnected. This is an ideal solenoid to be used for energise to off application. Considerbly reducing the installation cost

Our manufactured brake & life solenoid works efficiently in their specified functions. They cater to the requirements of diverse industries. Ours is a critical continuous duty application product. it is used to brake the elevator at various levels. The specifications of this product are:

• Ranges to 110 V DC / 220 V DC
• Force 70 kg

This product is used for converting electrical signal to reciprocating mechanical movement and to activate the mechanical devices such as fuel pump lever and more. Its a single winding solenoid, available at a competitive price. The specifications of this product are:

• Ranges from 12V DC 9 Amp/24V DC 4.5Amp
• Pull up to- 4.5kg
• Travel up to- 34mm

We offer fuel off solenoid at a cost effective price. These continuous duty product comes with a two winding solenoid for converting electrical signal to reciprocating movement, to activate mechanical devices. Defence approved solenoid is also available with us. The specifications of this product are:

• Ranges from 12V/24V DC
• Pull up to- 10 kg
• Travel up to- 50 mm

This continuous duty locking solenoids are wound with class 'H' wire potted with class 'H' epoxy, having high compaction and holding force. Available with us at a customer friendly price range.
The specifications of this product are:

• Ranging from 12V/24V DC (continuous operation)
• It’s an electro magnetic solenoid

This solenoid has very low Response time used in specific application in Electric Transformer. The solenoid comes with IP65 protection.

A "Green Solenoid Solution" utilising permanent magnet in conjuction with the solenoid to maintain the position of the plunger with no current applied. When a short pulse of electric current is applied to the CCIL, the plunger releases instantaneously.
Rating: 12V/24V DC
Force: 50N
Stroke: 8mm

A single winding solenoid for converting electrical signals to reciprocating mechanical movement. Fully sealed assembly. Currently used for switchgear change over applications.
Rating: 24V/32V, 48V/60V.110V/125V/220V AC
Pull/Push: 0.3-3 kg
Travel upto 25.4 mm

• Rico offer extensive range of door locking Solenoids.
• This solenoid is with plunger and steel cut and a robust mounting bracket.
• It is basically an electronic lock design for a basic cabinet for safe of door.
• Normally the lock is active so you cannot open the door because solenoid plunger is in the way
• It draws no power in this state when supply voltage is apply the plunger pulls in so the doors can open.

Specifications:
Voltage: 12/24/48/110 /210 Volt DC
Current: 110/230 Volt AC
Design: For Intermittent Duty Or Continuous Duty
Force:From 0.300 to 6 Kg

A combined device with a temperature sensor output and two independent swithcing outputs used for KKSB and Viscous Fans. It also takes input from the position of the acceleartion pedal to evolve a logic.
Rating: 12V/24V DC, 8Amp